OUXI GT2000 Safety Notice
Before your first ride, please read this manual carefully and follow all safety precautions.
Always wear a helmet and protective gear.
Ensure all bike parts are properly installed and undamaged.
Confirm folding joints are locked and brakes work correctly.
Check that your battery is fully charged before use.
Inspect tires for wear, pressure, and tread before riding.
Do not ride if under the influence of alcohol, medication, or feeling unwell.
Designed for one rider only (Max load: 330 lbs / 150 kg).
Avoid slopes steeper than 15° and avoid sudden acceleration or braking on slopes.
Do not ride in heavy rain or wet conditions — may cause slipping or electrical damage.
Never modify or disassemble your e-bike.
Not suitable for extreme sports, stairs, highways, or flooded roads.
Please check all parts upon unpacking. If anything is missing or damaged, contact OUXI customer support.
OUXI GT-2000 Electric Bike × 1
User Manual × 1
Charger × 1
Tool Kit × 1
Front Wheel × 1
Pedals (L/R) × 2
Front & Rear Mudguards × 2
Mudguard Bracket × 1
Headlight × 1
Inflator × 1
OUXI GT-2000 Packing List
GT-2000 eBike Installation Guide
How to Assemble Handlebar
Loosen handle screws.
Rotate the stem 180° and tighten screws.
Remove the front fork cover.
Mount the handlebar and cover.
Adjust direction and tighten screws.
How to Install Front Wheel
How to Add Mud Guard to OUXI GT2000
Remove the saddle screws and fender screws.
Attach rear board and tighten all screws.
How to install Headlight & Pedals
Headlight: Use tools to secure it in place.
Pedals: “L” = Left (turn counter-clockwise to tighten) | “R” = Right (turn clockwise to tighten)
Riding Modes
The OUXI GT-2000 supports three convenient riding modes:
Normal Bike Mode: Ride manually without power assist.
Pedal Assist Mode: Turn on LCD, select speed level (1–3), then pedal.
Booster Mode: Press the “–” button until “P” appears — the bike moves at ~6 km/h (3.7 mph) for easy pushing. Use the brake to stop.
GT-2000 Battery Charging Guide
GT-2000 features a built-in removable lithium battery. You can charge it on or off the bike.
Charging On the E-Bike
Open the charging port cover.
Plug the charger into the bike, then into the wall outlet.
Red light = Charging | Green light = Fully charged
After charging, unplug the charger and turn on the battery key switch.
Charging Off the E-Bike
Push and turn the key counter-clockwise to unlock the battery.
Open the clamp and slightly unfold the frame to remove it.
Connect charger directly to the battery.
- Press and hold i button for 3 seconds to power on the LCD display.
- Display turns off automatically during charging. Always keep your battery keys safe.
How to Remove OUXI GT2000 Battery
Follow these simple steps to safely remove the battery from your OUXI GT-2000 Electric Bike:
Step 1: Unlock the Battery
Insert the key fully into the battery lock, push it in deeply, then turn it counterclockwise to unlock the battery.
Step 2: Release the Clamp
Press the release button to open the battery clamp.
Step 3: Remove the Battery
Gently unfold the bike frame slightly, then slide the battery out from its compartment.
Always keep the key inserted during Pure Electric or Pedal Assist Mode.
Do not remove the key while riding, as it may interrupt power or damage the lock.
Store your keys safely to avoid losing access to your battery.
OUXI GT-2000 Display Settings
P00 – Factory Reset (optional)
P01 – Backlight Brightness: Level 1 = dimmest, Level 3 = brightest
P02 – Mileage Unit: 0 = KM, 1 = MILE
P03 – Voltage Level: 24V–72V (default 36V)
P04 – Sleep Time: 0 = never sleep; 1–60 = minutes to sleep
P05 – Assist Levels:
0–3 mode / 1–3 mode
0–5 mode / 1–5 mode
0–9 mode / 1–9 mode
(“0” means includes level 0 assist; “1” starts from level 1)
P06 – Wheel Diameter: in inches, accuracy 0.1
P07 – Speed Sensor Magnets: Range 1–255
P08 – Speed Limit: 0–100 km/h (±1 km/h accuracy)
Note: Speed values are based on km/h. When units are switched to miles, displayed speed adjusts automatically, but the limit value itself does not convert.
P09 – Start Mode: 0 = Zero Start; 1 = Non-zero Start
P10 – Drive Mode:
0 = Pedal assist only
1 = Throttle only
2 = Pedal assist + throttle (throttle disabled in zero start)
P11 – PAS Sensitivity: Range 1–24
P12 – PAS Start Strength: Range 0–5
P13 – PAS Magnet Type: 5, 8, or 12 magnets
P14 – Controller Current Limit: Default 15A, range 1–20A
P15 – Low Voltage Protection Value
P16 – Odometer Reset: Hold the UP button for 5 seconds
P17 – Cruise Control: 0 = Off, 1 = On (optional)
How to Make OUXI GT-2000 Faster
GT-2000 Electric Dirtbike Speed Setting
OUXI GT2000 Error Code
E00: Normal operation
E02: Brake activated
E05: Overvoltage protection
E06: Undervoltage protection
E07: Motor Hall sensor error
E08: Throttle fault
E09: Controller fault
E10: Communication error
E16: Ignition short circuit
E21: Controller overcurrent
-
SALE 
GT-2000 Electric Dirt Bike
Original price was: $1,599.00.$1,399.00Current price is: $1,399.00.Select options This product has multiple variants. The options may be chosen on the product page -
SALE 
OUXI H9
Original price was: $1,199.00.$1,059.00Current price is: $1,059.00. -
SALE 
OUXI V8
$939.00 $1,199.00Price range: $939.00 through $1,199.00Select options This product has multiple variants. The options may be chosen on the product page -
SALE 
20″ Fat Tire Electric Bike
$939.00 $999.00Price range: $939.00 through $999.00Select options This product has multiple variants. The options may be chosen on the product page