Parameter Value

Function

P0

1

Display Background brightness; Luminance level 1 to 3 = darkest to brightest

2

Mileage unit of distance, switch between Kilometers and miles. 0=KM; 1=MILE

3

Voltage grades: 24V, 36V, 48V, 60V, 64V default 36V; The battery and the kit voltages must be the same! (OUXI V8 electric bike = 48V)

4

Sleep timer: 0 =  LCD screen will never go off for energy save mode; Other numbers stand for the sleep time (1-60 min)

5

 PAS Grades: 0 – Has 3 grades mode: 1 grade 2V, 2 grade 3V, 3 grade 4V
1 – Has 5 grades mode: 1 grade 2V, 2 grade 2.5V, 3 grade 3V, 4 grade 3.5V, 5 grade 4V
* Options 0 and 1 indicate how much electric assist each grade will provide from the battery while pedaling and will affect the pedaling speed accordingly.

6

Wheel Size: unit, inch; Precision: 0 | 1;
* This parameter is related to the accuracy of speed showing on the display and needs to be set correctly

7

Speed measuring magnet: range 1-100

8

Speed Limit: Range 0-100 km/H, 100= No speed limit,
The OUXI V8 ebike comes with default setting preset to 25 (which means 25km or 18mph), but you can toggle this between to 100. Now 100 will not let you go 100km per hour, that would be maximum 32mph! Just think of these settings this way –
• 45 = 30mph max assist | • 100 = 32mph max assist
 * Random Error: ±1km/h; (Speed limit is for both PAS and Throttle)

9

Zero start & kick start setting, 0 = zero start; 1 = Non-zero start; Zero start (0) will engage the motor instantly jump forward while your bike is at a standstill; Non-zero start (1) will give some delay when you throttle, throttle will only works when your bike is moving.

P1

0

Drive Mode setting. This setting could come in very handy. This P setting allows you to turn off the throttle completely.
0 = driven by PAS. The throttle is useless at this time. Use this option if you just want pedal assist and NO throttle.
1 = driven by Throttle. PAS is useless at this time. If you do not need PAS, then use this option.
2 = driven by both PAS & Throttle. The throttle is useless at Zero Start status. Both throttle and Pedal Assit are active.

1

PAS sensitivity setting, range: 1-24; This setting means respond time when you want the motor to start assist based on how many pedal rotations you do. Set the sensitivity carefully, 1 is the most sensitive.

2

 PAS start intensity, This setting tells the motor how strong pedal assist you want it. setting range: 0-5; The lower value provides a little assist when you start pedaling.

3

PAS Magnet Type, three setting 5, 8 and 12.

4

Controller limit value set default 12A range: 1-20A

5

Controller under-voltage

6

ODO Zero-Out: Reset the odometer back to zero by long press + key for 5 seconds

7

Cruise Control. 0 = No enabling cruising, 1 = enabling cruising; Automatic cruise optional (valid for protocol 2 only)

8

Display speed ratio adjustment range: 50 % ~ 150 %

9

0 power bit, 0: 0, 1: does not include 0